Elite Dry Bath Incubator, EL series
Product
The Elite Dry Bath Incubator comes in single or dual block modes along with a comprehensive set of interchangeable blocks. It is designed for a variety of applications, including restriction digest, DNA denaturation, melting agar, coagulation studies, hybridization and hot start thermo-cycled reaction. Elite Dry Bath Incubator is recognized as the finest, fastest heating and smallest foot print dry bath incubator. In addition, the aluminum blocks can be removed for the use of a mini water bath or a bead bath. The temperature setpoint can be set in increments of 0.1°C from 5°C above ambient to 150°C. Optional PC control software allows the dry bath incubator to perform real time data recording through a PC.
MS06_Elite Dry Bath Incubator EL-01 / EL-02 * Marketing video
- Digital microprocessor controller confers performance and precise control
- Broad temperature control range & guaranteed uniformity
- Excellent heating rate
- Large LCD screen for instant observation
- User temperature calibration
- Can be used as a water bath or bead bath
- Molded aluminum alloy chamber
- Optional PC Control software available
| Cat. No. | EL-01 (Single Block) | EL-02 (Dual Block) |
|---|---|---|
| Display | LCD | |
| Power | 125W | 200W |
| Dimension (WxLxH) | 5.98"x5.91"x5.31" (152x150x135mm) |
5.98"x9.06"x5.31" (152x230x135mm) |
| Controller | Digital microprocess controller | |
| Heating chamber | Molded Waterproof aluminum alloy coated with PTFE | |
| Temperature control range | 5°C above ambient to 150°C | |
| Temperature increment | 0.1°C | |
| Temperature uniformity at 37°C | ± 0.2°C | |
| Temperature accuracy at 37°C | ± 0.2°C | |
| Timer | 99 (hr): 59 (min) / Continuous | |
| Safety | Leak proof heating chamber | |
| Over temperature protection | ||
| SSR failure detection | ||
| Operating temperature | Ambient to 40°C | |
| Block material | Aluminum alloy | |
| Block type | Standard and customized type are available | |
| PC Connection | RS232 | |
| Rated voltage | 110V / 220V | |
| Weight | Approx. 4.6lb (2.1kg) | Approx. 6.1lb (2.8kg) |
| Blocks | ||
| Block material | Aluminum alloy | |
| Dimension | (WxLxH) 3.11"x4.09"x1.97" (79x104x50mm) | |
| Block lifter well | Yes | |
| Thermometer well | Yes (except microplate blocks) | |
| Cat. No. | Product Description |
|---|---|
| EL-01-110/220 | Elite Dry Bath Incubator ( One block unit ); without block |
| EL-02-110/220 | Elite Dry Bath Incubator ( Dual block unit ); without block |
| Cat. No. | Product Description |
|---|---|
| MD-RS232 | RS 232 cable |
| MD-PCSW | Function control software package |
| MD-PCSW-R | Function control software package; including a RS232 cable |
| Cat. No. | Product Description | |
|---|---|---|
| Dry Bath Blocks | MD-MP01-S | For microplate; titer plate (Plain Block for Single Block unit only) |
| MD-MP01-D | For microplate; titer plate (Dual Block unit only) | |
| MD-MP02-S | For 96 wells deep microplate or PCR plate ( for Single Block unit only) | |
| MD-MP02-D | For 96 wells deep microplate or PCR plate ( for Dual Block unit only) | |
| MD-B0.2 | For 0.2ml tube, 64 wells (or 0.2ml PCR strip tube for 8 wells x 8) | |
| MD-B0.5 | For 0.5ml tube, 20 wells | |
| MD-B1.5 | For 1.5ml or 2.0ml tube, 20 wells | |
| MD-B1.5V | For 1.5 V-shaped tube only, 20 wells | |
| MD-B0.5+1.5 | Combination: for 0.5ml tube, 12 wells; and for 1.5ml tube, 12 wells (on the same side) | |
| MD-B0.5/1.5 | One side for 1.5 or 2.0ml tube, 20 wells and another side for 0.5ml tube, 30 wells (on the opposite side) | |
| MD-B13 | Well size 13mm, 20 wells | |
| MD-B17 | For 15ml centrifuge tube, 12 wells | |
| MD-B20 | Well size 20mm, 12 wells | |
| MD-B25 | Well size 25mm, 6 wells | |
| MD-B29 | For 50ml centrifuge tube, 4 wells | |
| MD-BD01 | Single bead MD dry bath block, (WxLxH) 79 x104x76mm | |
| MD-BD02 | Dual bead MD dry bath block, (WxLxH) 104 x158x76mm | |
| MS-BL95-E | Block Lifter, 95mm length with E-type retaining rings |
